You put your milk collector on, and a few minutes later it slips, tilts or falls. It is annoying, and it usually has a simple cause. In most cases a small change in how you wear it fixes the problem. This guide shows 7 easy fixes you can try today, in plain steps.
Key Takeaways
- A collector that will not stay in place is usually a fit or setup issue, not a faulty product.
- Dry skin, a snug nursing bra and a collector that is not too full solve most cases.
- Each Deepsea collector holds up to 100 ml, but most sessions collect much less.
- Wash it after every use so the silicone stays clean and soft.
Quick Check: Why Does a Milk Collector Slip?
| What you notice | Most likely reason | Try this |
|---|---|---|
| Slips down soon after wearing | Skin is damp or has cream on it | Fix 1 |
| Tilts or moves when you walk | Bra is too loose | Fix 2 |
| Milk spills when you bend | Collector is too full | Fix 3 |
| Leaves a gap at the edge | Not centred on the nipple | Fix 4 |
| Feels slippery or loose over time | Soap film or oil on the silicone | Fix 5 |
Fix 1: Start With Clean, Dry Skin
Wipe the area gently with a clean, dry cloth before you wear the collector. Skip cream, oil or powder on that side just before use. Anything slippery on the skin makes it easier for the collector to move. If you used cream earlier, wipe it off first.
Fix 2: Wear a Snug Nursing Bra
The collector sits inside your bra, so the bra holds it in place. A loose bra lets it tilt. Choose a nursing bra that fits snugly, and pull the cup up over the collector so it feels held but not squeezed. If the bra feels tight or uncomfortable, loosen it a little.
Fix 3: Do Not Let It Fill to the Top
Each Deepsea Prime Silicone Breast Milk Collector holds up to 100 ml. A heavier collector is more likely to tilt. Empty it when it feels heavy, and do this before you stand up or bend over. Keep the storage case that comes with your set nearby so you can pour and store quickly.
Fix 4: Centre It on the Nipple
Place the collector so the nipple sits in the middle. Look in a mirror the first few times. If one side of the edge lifts, adjust gently until it sits flat against the breast. A well-centred collector stays steadier than one placed off to the side.
Fix 5: Wash It the Right Way
Wash the collector with warm water and a mild soap after each use, then rinse well. Leftover soap film or oil can make silicone feel slippery. Let it air dry fully before you wear it again. Silicone is soft and flexible, so avoid rough scrubbing.
Fix 6: Sit Up and Move Gently
When you wear the collector, sit upright. Lean forward slowly rather than suddenly. Many mothers wear it on the side they are not feeding from, while baby feeds on the other side. This keeps it still, so there is less chance of slipping.
Fix 7: Check That It Is the Right Fit for Your Day
A collector works best when you are resting or feeding. For long walks, shopping or travel, a nursing pad may suit you better. Our guide to milk collector vs nursing pads explains when to choose each one.
Still Not Staying in Place?
If you have tried all 7 fixes and the collector still moves, message us on WhatsApp. Tell us how you wear it and we will help you. Unused items can also be returned within 30 days in the original packaging.
More Guides You May Like
- Silicone milk collector: the complete guide for new moms
- How to store breast milk safely in Pakistan
- New Mom Essentials Kit, which includes a milk collector, nursing pads and a nipple shield
Frequently Asked Questions
Why does my milk collector keep falling off?
Most often the skin is damp or has cream on it, the bra is loose, or the collector is too full. Try Fix 1 to Fix 3 first.
How much does one Deepsea milk collector hold?
Up to 100 ml per collector.
Can I wear the collector under my normal clothes?
Yes. It sits inside your nursing bra, so it is not visible under loose clothing.
How do I clean my milk collector?
Wash it with warm water and mild soap after each use, rinse well and let it air dry.
Is the silicone safe?
The collector is made of BPA-free, food-grade silicone and PP, and is CE certified.
Do I get one or two collectors in the box?
Two collectors, one for each side, plus a storage case.
0 comments