Deepsea Prime Silicone Breast Milk Collector

A breast milk collector is a silicone cup worn inside the nursing bra on the non-nursing breast during a feeding session. When a baby feeds from one breast, the let-down reflex often triggers milk flow from the other breast simultaneously. Without a collector, this milk soaks into a nursing pad and is discarded. With the collector in place, this milk flows directly into the 100ml silicone cup and is saved for feeding or storage. No suction, batteries, or active effort are required. The collector sits gently against the breast and creates a passive seal that holds collected milk securely without leaking during the session

Yes, this is the primary and most effective use. Place the collector over the nipple on the non-nursing breast before latching the baby on the opposite side. As the let-down reflex triggers during nursing, milk flows passively from the resting breast into the collector cup. The soft silicone seal holds the collector in place inside the nursing bra throughout the session without requiring the mother to hold it. After the feed, remove the collector carefully, cap it with the included storage box lid, and refrigerate or use the milk as needed. This turns every nursing session into a dual-output event without any additional pumping time.

A breast pump actively draws milk from the breast using motor-driven or manual suction, requiring the mother to dedicate a separate pumping session and operate the device. A breast milk collector is entirely passive. It sits against the non-nursing breast and collects only the milk that flows naturally from the let-down reflex during nursing or pumping on the other side. No suction is applied, no effort is required, and no additional session time is needed. The collector cannot replace a pump for building supply or for mothers who are exclusively pumping, but it captures milk that would otherwise be completely lost during every nursing session, making it a simple and effective complement to any breastfeeding routine

Each Deepsea Prime Silicone Breast Milk Collector holds 100ml. The amount of milk collected per session varies significantly between mothers and depends on the strength of the let-down reflex, supply level, and how long since the last feed. Most mothers collect between 10ml and 40ml per nursing session from the opposite breast in the early weeks when supply is at its peak. The 100ml capacity is sufficient for most single sessions, and the pack of two ensures one collector is always clean and available. Collected milk can be transferred to a labeled storage bag or container for refrigeration or freezing immediately after the feed using the included storage box

Before first use: wash both collectors and the storage case in warm water with mild, fragrance-free soap, then rinse well.

After every use:

1. Rinse the collector with cool water to remove milk residue.
2. Wash with warm water and mild soap, using a clean bottle brush or soft cloth.
3. Rinse well so no soap is left.
4. Air-dry completely on a clean towel before putting it back in the case. Do not store it damp.

Care tips: avoid abrasive scrubbers and harsh chemicals, and wash your hands before handling. Check the silicone regularly and replace the collector if you see cracks, tears or a sticky surface. For sterilizing, follow the instructions on your product packaging, or message us on WhatsApp and we will help.