Everything about your pump
In the box
- Dust cover
- 3D silicone massage cushion
- 3-way connector
- Fastening cover (lid)
- Silicone cylinder
- Carry ring
- Handle
- Duckbill valve
- 150 ml bottle
- Teat set for the feeder bottle
- Printed guide with pictures
Assemble
- Fit the silicone cylinder into the 3-way connector and check it is sealed firmly.
- Place the handle on the pull ring and secure it with the handle bracket on the connector.
- Fix the lid onto the suction bowl and fasten it.
- Insert the 3D massage cushion through the bell on the connector, then push it into the vent of the connector.
- Screw the bottle onto the thread at the bottom of the connector.
- Cover with the dust cover when you are not using it.
The printed guide in the box has a picture for every step. Before each use, check that all fittings are correct and tight.
Use
- Sit comfortably and relax.
- Centre the flange on the nipple and keep it close against the breast.
- Hold the handle and squeeze and release with a strength that feels comfortable to you. You control the suction.
- Do not over-express. If you feel severe pain, stop and speak to a healthcare professional.
Not getting suction? Check that the breast is sealed against the flange, that the massage cushion, duckbill valve, cylinder and handle are fitted in place, and that the bottle is tight.
Clean
- Wash all parts before first use and straight after every use, then let them air dry.
- Clean the silicone parts gently with a soft cloth or sponge. Rough scrubbing can scratch or damage them.
- To sterilise, use a sterilizer, or boil the parts for 5 minutes. Do not let parts touch the bottom of the pot.
- Do not boil the handle. Wash it by hand and wipe it dry.
A slight smell from new parts is normal and fades after the first wash.
Materials and safety
- Massage cushion and cylinder: soft silicone.
- Handle: ABS plastic.
- Bottle, connector, covers and carry ring: PP plastic.
- Keep the pump and its small parts away from infants and young children.
- Use the pump only as described in the guide.
The soft silicone cushion was tested by an independent laboratory (SGS, 2023) and no bisphenol A was detected. The test covered the silicone cushion.
